Commercial kitchens in Tempe generate heavy grease loads from fryers, grills, and dish sinks, especially during the long hot summers when air conditioning runs constantly and staff push volume through lunch and dinner rushes. Hydro jetting uses high-pressure water streams at 3,000 to 4,000 psi to scour pipe walls rather than simply punching a hole through a clog. In Maricopa County buildings near Mill Avenue or Arizona State University, older cast iron and clay lines from the 1960s and 1970s are common and can crack under excessive pressure if the operator does not read the line first with a camera.
Floor drains in South Tempe restaurants often connect to shared laterals that also serve neighboring businesses, so a jetting job must account for backflow into adjacent units. The desert climate produces rapid evaporation that concentrates fats, oils, and grease inside traps and pipes faster than in milder regions. Jetting schedules are typically set every 90 to 120 days for high-volume kitchens to stay ahead of Maricopa County health inspections that flag standing water or slow drains.
Technicians at 1553 W 7th Pl keep jetting hoses, root cutters, and recovery equipment staged for quick response to calls from Papago Park hotels and Downtown Tempe food halls. Proper jetting also flushes the line into a recovery tank so solids do not push into the city main on 7th Street or University Drive. Skipping the recovery step can create liability when a downstream restaurant reports a new backup the same afternoon.
Technician insight
In Tempe the thing that catches most people out with commercial kitchen drain jetting is how fast grease sets up once the sun drops and lines cool overnight. South Tempe restaurants with long runs to the street main see the heaviest buildup because the hot desert days keep fats liquid until they hit the cooler clay sections near Papago Park.
Mill Avenue Restaurant Backup
A kitchen on Mill Avenue lost all floor drains during Friday dinner rush. Camera showed a 40-foot grease plug in 4-inch cast iron. Progressive jetting from the cleanout at 1553 W 7th Pl base truck cleared the line and recovered 18 gallons of FOG. Drains flowed freely by 8 pm and the restaurant reopened the next morning without further issues.
Commercial Kitchen Drain Jetting Services We Offer
✓Grease Interceptor Jetting
High-pressure flushing of grease interceptors and connecting lines to remove compacted FOG before it hardens and blocks flow to the sewer main.
✓Kitchen Floor Drain Jetting
Targeted jetting of floor drains in prep areas and dish pits to clear hair, food particles, and grease that collect around strainer baskets.
✓Commercial Sink Line Jetting
Clearing three-compartment sinks and hand-wash stations where soap and grease combine to form stubborn clogs in older Tempe buildings.
✓Main Sewer Jetting for Restaurants
Full-line hydro jetting from the kitchen cleanout to the street connection to restore flow in shared laterals common near Arizona State University.
✓Emergency Kitchen Drain Jetting
Same-day response jetting for kitchens that lose all drains during peak service hours in Downtown Tempe or South Tempe locations.
Commercial Kitchen Drain Jetting Cost in Tempe, AZ
| Service | Typical Range | What Affects It |
|---|---|---|
| Single Kitchen Line Jetting | $350–$550 | One main line under 75 feet with moderate grease |
| Full Kitchen Package | $600–$950 | Multiple floor drains plus grease interceptor connection |
| After-Hours Emergency Jetting | $550–$900 | Evenings or weekends for restaurants near Mill Avenue |
| Recurring Quarterly Service | $300–$450 | Per visit when scheduled in advance for South Tempe locations |
Ranges are typical for Tempe, AZ and confirmed with an exact written quote before any work starts.
How it works
- 1
Camera Inspection
We run a camera from the nearest cleanout to locate grease buildup, pipe material, and any offsets before jetting begins.
- 2
Setup and Containment
Hoses are connected and a recovery tank is positioned to capture debris so nothing enters the Tempe city sewer during flushing.
- 3
Progressive Jetting
We start at lower pressure and increase while moving the nozzle through the line, cutting grease and scouring walls in multiple passes.
- 4
Final Flush and Verification
A final camera pass confirms the line is clear and we document flow before leaving the site.
Pricing
Most commercial kitchen jetting jobs in Tempe fall between $350 and $850 depending on line length and grease load.